Advertisement
WebEye A10 User's Guide V 1.5
6. Configuring WebEye
1) Start web browser and access
WebEye.
2)
Enter
administration
WebEye.
3) Select 'Serial Configuration' in
administration menu.
4) Select 'Serial #1' in Serial Configuration For Port #1
5) Select 'Audio Device' in 'Select
Attached Device' menu.
6) Select 'On' in 'AGC Control Enable'
in AGC(Automatic Gain Control)
function needed.
7) Configure 'Microphone Volume
Level'.
8) Click 'Apply' button to confirm the configuration.
9) Click 'Goto Viewer Page' to monitor image.
* When Audio configuration is completed, the LED blinks.
* When 'AGC Control Enable' is configured as 'On', Mic. volume may not be controlled.
IV . Specifications of WebEye A10
Operating S/W
Audio Compression
Input (Microphone)
External
Communication
Power supply
Mechanical
Usable Accessary
page
of
O/S: Windows 98/ME/NT/2000
Web browser: MS Internet Explorer (Version 5.0 or above)
Software: WebEye A udio S/W (Active-X Control from WebEye E10/E104)
Compression type: TrueSpeech 8.5 Engine
H/W Codec: CT 8022 (DSP inside TrueSpeech Codec)
Sample dimension: A-law 8 bit
Sampling rate: 8000 Hz
Transfer rate: 8 Kbps
Impedance: Max. 2.2KΩ
Sensitivity: -36dB ~ -40dB
Standard power supply: 4.5V DC
Serial: RS232C, 38400bps
Cable: 8Pin RJ-45 Modular Jack to D-Sub 15pin
Accessable Clients at the same time:
DC 12V, 1.0A
Dimension: 94mm x 81mm x 28mm
Weight: 180g (without adaptor)
External Mic.(Condensor Mic.)
Max. 5 (in using ADSL)
Max. 15 (in using Cable Modem)
Max. 100 (in using LAN)
8 -
Advertisement
