ViewSonic VE710b-4 Service Manual page 23

(4) 9300K verify: move cursor to 9300K Press
(5) 6500K verify: Repeat (4) press " ¡¿ " ," ¡¶ " move cursor to 6500K press
(6) 5400K verify: Repeat (4) press " ¡¿ " ," ¡¶ " move cursor to 5400K press
(7) Press
G. Color Temperature & Luminance Verify:
2. Geometry:
(a). Set cross-hatch pattern and preset timing as timing table listed.
(b). Change to each mode in turn and wait for the monitor finish auto-alignment and save process before
change to next mode.
(c). Until all of modes are agjusted, exit OSD menu and press PWR OFF to exit factory mode.
ViewSonic Corporation
Press " ¡¿ " ," ¡¶ " key adjust R.G.B value
x=0.283 ¡Ó 0 .02
y=0.298 ¡Ó 0 .02
Press key return to Fig.2
1
x=0.313 ¡Ó 0 .02
y=0.329 ¡Ó 0 .02
2
Y ¡Ù 240 cd/m
x=0.332 ¡Ó 0 .02
y=0.348 ¡Ó 0 .02
1
key go back to Fig.2, Then press
OFF/ON quit factory mode.
BRIGHTNESS MAX, CONTRAST MAX
9300K: x=0.283 ¡Ó 0 .02 y=0.298 ¡Ó 0 .02
6500K: x=0.313 ¡Ó 0 .02 y=0.329 ¡Ó 0 .02 Y¡Ù240 cd/¢T(CPT Panel) Y¡Ù230 cd/¢T(CMO Panel)
5400K: x=0.332 ¡Ó 0 .02 y=0.348 ¡Ó 0 .02
(Fig.2)
key.
2
1 key return to Fig.1, Power key
20
Confidential - Do Not Copy
key
2
2
key
VE710s-4_VE710b-4