Prior To Using The Machine; Preparing The Machine For Use; The Importance Of Water Decalcification; Filling With Salt - IFB ZEPHYR SX User Manual

Table of Contents

Advertisement

Prior to using the machine for the first time
Check whether the electricity and supply water specifications match the values indicated by the
installation instructions for the machine.
Remove all packaging materials inside the machine.
Set the water softener.
Add 2 kg salt into the salt compartment and fill with water up to a level at which it will almost
overflow.
Fill the rinse aid compartment.

PREPARING THE MACHINE FOR USE

The importance of water decalcification

For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white
lime residues will remain on the dishes and the interior equipment. This will negatively affect your
machine's washing, drying and shining performance. When water flows through the softener system,
the ions forming the hardness are removed from the water and the water reaches the softness
required to obtain the best washing result. Depending on the level of hardness of the inflowing water,
these ions that harden the water accumulate rapidly inside the softener system. Therefore, the
softener system has to be refreshed so that it operates with the same performance also during the
next wash. For this purpose, dishwasher salt is used.

Filling with salt

Use softener salt specifically produced for use in dishwashers. To
compartment gets filled with water. Therefore, put the softener salt prior to starting your machine.
This way, overflowing salt gets immediately cleaned up through the wash operation. If you are not
going to wash any dishes immediately after putting salt, then run a short washing program with an
empty machine in order to avoid any damage ( to prevent corrosion ) to your machine due to the salt
overflow while filling in the salt container.
put softener salt, first remove the
lower basket and then open the salt
compartment
cap
counter
clockwise.1 2
compartment
with
water
3
at
overflowing
available,using the funnel
will make filling easier; refit the cap
and close it.
After every 20th-30th wash, add salt
into your machine until it fills up
(approx. 1.5 kg)
Fill the salt compartment with
water at first use only.
We recommend that you use small-
grained or powder softener salt.
Do not put table salt into your
machine. Otherwise, the function of
the
softener
compartment
decrease over time. When you start
your
dishwasher,
11
by
turning
it
At first fill the
2kg salt
and
level
If
4
provided
may
the
salt

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZEPHYR SX and is the answer not in the manual?

Questions and answers

Table of Contents