Table of Contents
Advertisement
To remove the worktop, remove the screws that hold the worktop which are located at the rear of the
machine; then push the front panel 1 cm from the front side towards the rear and lift it.
Adjust the machine feet according to the slope of the
floor.3
Fit your machine by pushing it
undercounter without letting the hoses get crushed or
bent.4
Warning: After removal of worktop, the machine should be placed in such a closed place of which
dimensions are shown at fig.
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ZEPHYR SX and is the answer not in the manual?
Questions and answers