Table of Contents
Advertisement
Available languages
Available languages
BASKET ASSEMBLY
1. Attach the basket handle to the basket by squeezing the two handle wires
together and inserting the ends through the two eyelets in the basket.
2. Rotate the handle backwards until it locks securely in the place. Ensure the handle is
securely connected to the basket before operating your fryer.
OPERATING INSTRUCTIONS
1.
Place the fryer on a stable, flat and dry surface.
2.
Ensure the fryer is switched off.
3.
Slowly fill the oil between the minimum and maximum oil level marks inside the oil
bowl.
4.
Set the temperature knob to the required temperature and switch on the appliance.
5.
The pilot light will go off when the temperature is reached. The oil or fat will be heated
to the selected temperature in 8 to 12 minutes.
6.
With the basket positioned on the hook, put the food into the basket (e.g. fries) and
slowly immerse into the heated oil.
7.
Ensure the basket has been inserted properly.
8.
During the frying cycle, the pilot light will go on and off and this is normal as the
appliance is equipped with a temperature regulator.
9.
Should you accidentally switch ON your deep fryer without oil, or without the
minimum amount of oil required, the deep fryer will automatically cut-out, to stop the
appliance overheating. If this should happen, first switch off and unplug the deep
fryer. Wait until the element cools down. Use the reset key to reset the fryer. This will
reset the deep fryer. Your fryer is now ready to use.
AFTER FRYING
1.
Remove the basket from the fryer.
2.
Shake the basket to remove excess oil.
3.
Switch off the appliance.
4.
Unplug the appliance after use.
5.
Let it cool down before cleaning or moving away.
Heaven Fresh
5
HF 1030
Advertisement
Table of Contents
