Safety Cut-Out - Heaven Fresh NaturoPure HF 1030 Instruction Manual

SAFETY CUT-OUT

This fryer is equipped with a safety cut-out to protect the appliance from overheat such as not
enough oil or fat or if blocks of solid fat are being melted in the fryer.
Carry out the following steps when the safety cut-out has switched off the appliance.
1. Let the oil cool down for 30 minutes.
2. Use the Reset Key to reset.
PRE-OPERATING INSTRUCTIONS
1. Remove the lid, frying basket, fryer and all packaging material from the retail box.
2. Wash the fryer basket and cover in hot, soapy water. Wipe them dry thoroughly.
3. Wipe the inside of the bowl with a damp cloth and make sure it is completely dry
before you fill the fryer with oil or fat.
4. This fryer is equipped with a safety micro-switch at the control box. This is to ensure
the control box is fixed to the outer metal case in correct position before the unit
can be started to use. Fix the control box to the slot on the side of the outer metal
case. Ensure the safety micro-switch is pressed by the trigger on the outer metal
case. The unit cannot be operated until the control box is fixed to the outer case
correctly. If it is not working, remove the control box and fix it again until the micro-
switch has been pressed by the trigger.
Micro Switch
Miro-switch
Heaven Fresh
Ensure the Miro-switch is
activated by the trigger
4 HF 1030