Checking The Rds Information - JVC RX-774RBK Instructions Manual

7. Press ON SCREEN CONTROL % / fi / @ / # to move
character you want.
You can also select the following:
SPACE: To enter space
: To go back to the previous character position or go to the next character
position
8. Press SET to enter the selected character.
9. Repeat steps 7 and 8 to enter up to four characters.
10. Press ON SCREEN CONTROL % / fi / @ / # to move
NAME," then press SET to store the setting.
The TUNER CONTROL menu appears again.
11. When you finish, press EXIT repeatedly until the menu disappears from the
TV.

Checking the RDS Information

1. Press any button of ON SCREEN CONTROL % / fi / @ / # once.
The MAIN MENU appears on the TV.
2. Press ON SCREEN CONTROL % / fi to move
then press @ / #.
The TUNER CONTROL menu appears.
3. Press ON SCREEN CONTROL % / fi to move
then press @ / #.
The RDS INFORMATION menu appears.
4. When you finish, press EXIT repeatedly until the menu disappears from the
TV.
CANCEL: To erase the character
(Also see page 31)
to "TUNER CONTROL,"
to "RDS INFORMATION,"
in front of a
to "PRESET
PRESET MEMORY menu:
Character entry screen
RDS INFORMATION menu
Notes:
• The on-screen display cannot
show accented letters.
• RDS is not available for AM
(MW/LW) broadcasts.
58