Electrical Connection - Venini VECE6005 User And Installation Instructions Manual

ELECTRICAL CONNECTION

This appliance must be installed by a competent person, such as one holding NICEIC Registration
and in accordance with the latest edition of the IEE WIRING Regulations.
Before connecting the appliance, make sure that the supply voltage marked on the rating Plate
corresponds with the mains supply voltage.
In Australia the appliance must be installed by a qualified electrician in accordance with
AS/NZS3000 wiring rules.
WARNING – THIS APPLIANCE MUST BE EARTHED
Depending on the Power Input of the model to be installed, connection will require a 32Amp
protected supply using a switched double pole isolating unit having a minimum 3mm contact
separation. (see Technical Data at page 11 for full information).
Care must be taken to avoid the cable being in contact with hot parts of the appliance.
The isolating unit should be placed in an easily accessible position adjacent to the appliance.
NOTE
The appliance must not be connected to the mains supply by means of a 10A plug and
socket.
MAINTENANCE
During the guarantee period, in case of need all service intervention should be referred
back to the Venini Service Department. Please note that intervention or repair by any
unauthorised personnel will invalidate such guarantee.
10