Polarstart PS-2600 Installation Manual

Remote control car starter for automatic transmissions

Advertisement

Quick Links

POLARSTART
PS-2600
REMOTE CONTROL CAR STARTER
FOR AUTOMATIC TRANSMISSIONS
INSTALLATION MANUAL
WARNING
THIS UNIT MUST BE INSTALLED BY A QUALIFIED
,
TECHNICIAN
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS-2600 and is the answer not in the manual?

Questions and answers

Summary of Contents for Polarstart PS-2600

  • Page 1 POLARSTART PS-2600 REMOTE CONTROL CAR STARTER FOR AUTOMATIC TRANSMISSIONS INSTALLATION MANUAL WARNING THIS UNIT MUST BE INSTALLED BY A QUALIFIED TECHNICIAN...
  • Page 2 Prior to installation please be sure that all hardware • Remote Trunk release components required to install the • Engine kill PS-2600 are in the box. • Flashing LED This is a list of components included in the • Pager Ready PS-2600 kit: •...
  • Page 3 7. Button 1 will Decrease the setting, and TACH ADJUSTMENTS button 2 will Increase the setting. The PS-2600 has two methods of fine tuning the 8. After proper setting has been reached, push tach signal that is generated from the vehicle, the Transmitter button 1 and 2 to save setting.
  • Page 4 OPTION 1* Trunk release on channel 3 ( will In order for the PS-2600 to work in vacuum not receive signal while ignition mode you must first set the tach signal to a is “ON”) setting of 8 flashes.
  • Page 5 RESSETING THE MODULE DIESEL ENGINES The PS-2600 is equipped with a reset function With the increase in the Diesel Engine population that allows the user to erase any transmitter code the PS-2600, has become very adaptable to Diesel or programmed options.

Table of Contents