Remove Hpa Procedure - Voom SuperDuper User Manual

Voom Technologies, Inc. © 2007-2013 Proprietary

6.6 Remove HPA Procedure

The following table describes the sequence associated with removing a HPA
from each of the target drives using the button panel interface.
LCD interface
SuperDuper 2-01
Status: Ready
Drives: 12345678
1:System Test
2:Clone Drive
3:Verify Drives
4:Wipe Drives
5:Remove HPA
Remove Target HPA
OK (enter/cancel)?
Removing Target 1
HPA
. . .
Removing Target 8
HPA
Operation Complete
Comments
From the main window, press <menu> to
display the initial menu item.
Press < menu > again to advance to the next
menu item.
Press < menu > again to advance to the next
menu item.
Press < menu > again to advance to the next
menu item.
Press < menu > again to advance to the next
menu item.
Press <enter> to execute the remove HPA
command.
Press <enter> to acknowledge that you want to
proceed.
Interim status of the remove HPA operation.
Interim status of the remove HPA operation.
The status displayed after it completes the
command.
15
www.voomtech.com