Wyred 4 Sound audio products are designed to bring you closer to the beauty of your music. Our goal is to bring the performance of the recording right into your home with as little change as possible. As you can identify, our drive is focused on the customer.
192 kHz, but is not guaranteed. The DAC-1 USB input will process signals up to 24 bit in length, and sample rates up to 96 kHz. The heart and soul of the DAC-1 uses the 8ch ESS chip in quad-differential mode meaning that there are actually 4 differential D-A conversion circuits for each channel in parallel.
With a quick look at the setup options, you will quickly see how flexible the DAC-1 really is. With each input offering different output levels, you can choose the independent control of each source to best suit the needs of your system. As you will find, other setup options include display dimming options, automatic input scrolling, IIR Bandwidth, PCM Roll-off slope (fast/slow), and a default reset in case things get jumbled up.
The front of the DAC-1 offers several features. You will notice a power button to turn the DAC on and off, as well as 2 others that are used for input scrolling. Across the DAC-1 display, you will see the selected input on the left and corresponding sample rate of the signal to the right.
1. Navigate to the Wyred 4 Sound website downloads page. http://www.wyred4sound.com/downloads.html 2. Locate the file titled “Asynchronous DAC-1 driver package” and click “download”. 3. Next click “Save” and be sure to note or specify the folder on your computer where the file will save to.
DAC after all final connections have been made and checked. The input and output connections you will find on the DAC-1 are made of nothing but the best. The RCA (unbalanced) output, and Coax input jacks are made with high quality gold plated copper, and should be properly connected with interconnects of the same value.
Wyred 4 Sound directly for further assistance. Because the DAC-1 is really an 8ch DAC inside, make sure that all sources (where applicable, ie: DVD players, cable/satellite boxes) are programmed in their setup menu to output 2ch PCM or stereo digital signals. In some cases, the DAC will actually try to decode multichannel formats, but will be unsuccessful because the DACs outputs are tied together internally.
Wyred 4 Sound's property. Parts provided by Wyred 4 Sound in fulfillment of its warranty obligation must be used in products for which warranty service is claimed. When a refund is given, the product for which the refund is provided must be returned to Wyred 4 Sound and becomes Wyred 4 Sound's property.
Page 11
A Wyred 4 Sound representative or Wyred 4 Sound Authorized Service Provider will help determine whether your product requires service and, if it does, will inform you how Wyred 4 Sound will provide it. Wyred 4 Sound or its Wyred 4 Sound Authorized Service Providers will provide warranty service on products that are tendered or presented for service during the Warranty Period, as permitted by law.
Wyred 4 Sound may, at its discretion, return a product in new packaging and bill the owner for such packaging if the product received by Wyred 4 Sound was boxed in nonstandard packaging or if the original packaging was so damaged to the point it was unusable.
Page 13
Service Department and ensure all freight (shipping) charges are prepaid. If you feel your authorized dealer or distributor is either unwilling or unable to service your Wyred 4 Sound products, please contact our service department at customersupport@wyred4sound.com or at the above contact numbers to discuss and resolve the situation.
Need help?
Do you have a question about the DAC-1 and is the answer not in the manual?
Questions and answers