Subscribe to Our Youtube Channel
Related Manuals for Wyred 4 Sound mDAC
Summary of Contents for Wyred 4 Sound mDAC
- Page 1 Wyred 4 Sound µDAC Owner’s Manual Wyred 4 Sound 4235 Traffic Way Atascadero CA, 93422 ©Wyred 4 Sound 2014 All rights reserved. v1.2 Page 1 of 11...
-
Page 2: Table Of Contents
1 - Unit Introduction Thank you for purchasing your new piece of Wyred 4 Sound gear. This ultra-compact unit has a variety of features that would be expected in a chassis well over double the size! There are two S/PDIF inputs which support 24 bit 192 kHz signals as well as an asynchronous USB input for computer streaming. -
Page 3: Μdac Usb Configuration (Mac)
µDAC USB Configuration (MAC) When connecting to Mac computers the USB interface automatically installs the drivers into the operating system. If you are using a PC, drivers are required for asynchronous operation and they are located on this disk. Please refer to the section titled ”µDAC USB Configuration (PC)” for PC setup instructions. -
Page 4: Μdac Usb Configuration (Pc)
Please follow these steps when connecting your new unit to a PC computer. Drivers are located on this disk and are also available for download on the Wyred 4 Sound website. The drivers can be accessed directly at this address (http://www.wyred4sound.com/downloads.html). The driver package on our website is called “µDAC 24/96 Asynchronous Driver Package and manual”. - Page 5 2. Click “Setup Software” in the window that pops up. 3. Click “Next” to proceed with installation. 4. On the bottom of the new window, choose whether this should be installed for “Everyone” or “Just me” and click “Next”. (Typically “Everyone” will be the appropriate choice. If you have multiple user profiles on your computer and would prefer the driver to only be available when you are logged in, select “Just me”) Page 5 of 11...
- Page 6 5. Follow all prompts with-in the setup to continue the procedure. (Click “Next” two times) If you are asked to continue with non-Windows “signed” driver, please click “continue installation”. 6. Once the installation has finished, you will be see a window called “RegSvr32”, please click “Ok”. The installation has completed and the driver is ready to use.
-
Page 7: Μdac S/Pdif Configuration
µDAC S/PDIF Configuration If you will be using the S/PDIF inputs for the µDAC please follow these directions. 1. USB Power: Connect the USB cable to the USB power adapter and plug it into an outlet. Next plug the USB cable into the µDAC and turn it on by selecting “USB” on the POWER SELECT three position switch labeled (DC-OFF-USB). -
Page 8: Warranty
Wyred 4 Sound is not responsible for damage arising from failure to follow instructions relating to the product's use. This warranty does not apply: (a) to damage caused by use with non-Wyred 4 Sound products; (b) to damage caused by accident, abuse, misuse, flood, fire, earthquake or other external causes; (c) to damage caused by operating the product outside the permitted or intended uses described by Wyred 4 Sound;... - Page 9 Wyred 4 Sound Authorized Service Provider will help determine whether your product requires service, and if it does will inform you how Wyred 4 Sound will provide it. Wyred 4 Sound or its Wyred 4 Sound Authorized Service Providers will provide warranty service on products that are tendered or presented for service during the Warranty Period, as permitted by law.
-
Page 10: Service
Wyred 4 Sound may, at its discretion, return a product in new packaging and bill the owner for such packaging if the product received by Wyred 4 Sound was boxed in nonstandard packaging or if the original packaging was so damaged to the point it was unusable. -
Page 11: Specifications
Wyred 4 Sound PH: 805-466-9973 Fx: 805-462-8962 Email: support@wyred4sound.com Page 11 of 11...
Need help?
Do you have a question about the mDAC and is the answer not in the manual?
Questions and answers