Mode ..............................8 Encoder ..............................9 Expanded sets............................10 Working with two micromodul LX1’s ....................10 Combining the LX1 and the micromodul LV1.................. 10 Creating a custom DJ set with the micromodul LV1, LX1 und DJ1 ..........11 LV1, LX1 and DJ1 as a trio....................... 11 Controller numbers..........................
Use a soft towel or brush to clean the instrument. Please do not use any cleaning liquids or water, so you avoid any damages to the instrument. Page 2 micromodul LX1 User manual...
If you should have any sort of other problem with your micromodul, just contact us via email using the email address on our homepage: Page 3 micromodul LX1 User manual...
System requirements PC or Mac with a Midi-Interface (Midi-Input) Ableton Live or software which allows self-assignments of key commands for switching parameters. (Optimal with Ableton Live as of version 2.0 with the enclosed setup file) Page 4 micromodul LX1 User manual...
If your computer does not have a midi interface, or your sound card does not have one either, there is a small and inexpensive solution in the form of a USB midi interface that has both midi-in and midi-out. Page 5 micromodul LX1 User manual...
Simply press one of the 8 buttons in the row you wish to program, and look that the Track and Slot LED’s to see which function this row currently has. You can switch functions by holding down a button and changing to another mode by using the Mode button. Page 6 micromodul LX1 User manual...
You will need to reinsert any of your effects, since effects are not copied with the sets. Maybe ABLETON has a solution to load controller templates in order to quickly adjust existing sets to various controllers. Page 7 micromodul LX1 User manual...
This is an important feature when using the LX1 together with the LV1. When using the mix mode, the same buttons always have the same function they had in track and slot mode. Page 8 micromodul LX1 User manual...
64 buttons. This is, of course, also dependent on which group is selected (1-8 or 9-16). The master-track can only be selected by using the encoder. Page 9 micromodul LX1 User manual...
A midi loop is not needed. That means the midi in on the first instrument is not connected to the computer. Other than this item, the connection order and placement order is totally up to you. Working with two micromodul LX1’s Multiple...
In both of these expanded sets, the control elements for the DJ1 are assigned exactly the same as in the standard DJ1 controller set. Here are a possible combination: LV1, LX1 and DJ1 as a trio Page 11 micromodul LX1 User manual...
(spontaneous switching of track and key mode) with the micromodul system. These ”events” are only used by a few very expensive keyboards. Page 12 micromodul LX1 User manual...