Advertisement
Quick Links
Advertisement
Related Manuals for Faderfox PC44
Summary of Contents for Faderfox PC44
- Page 1 Faderfox Solid control PC44 User manual...
- Page 2 Provision of guarantee and product liability The seller warrants for faultless material and proper manufacture for a period of 24 months from the date of sale to the end user. Excluded from the stated guarantee are defects on parts as the result of normal wear-and-tear. These parts are mostly faders (sliding guides), potentiometers, encoders, buttons, switches and touchpads.
- Page 3 Introduction Thank you for choosing a Faderfox controller. The PC44 is the third member of a new line called SOLID CONTROL. These devices are designed for live use on stage packed in a covered alu case with a massive alu faceplate and high quality controls.
- Page 4 Features Universal controller for all kinds of midi controllable hard- and software USB interface with bus powering - class compliant / no driver necessary (consumption < 100mA) MIDI in and out ports with routing and merge functionality 68 pots with rubber knobs and standard midi resolution of 7bit Fast control assign by incoming midi commands like control change (CC), pitch bend, program change Switchable Snap function for all pots to avoid value jumps Switchable Lock function for all pots to show a controls value permanently...
- Page 5 Controller mode Controller mode is the basic mode of the PC44. Here the pots, encoder and buttons are used to control any parameters in your soft- or/and hardware by standard midi commands like CC and notes. The pots can work in snap or jump mode. In snap mode you have to catch the last value which avoids any possible value jumps after feedback data.
- Page 6 Edit mode The edit mode allows the programming of the controls (pots, encoder and buttons). Start and leave edit mode by holding down shift key and press the black edit key. The activated edit mode is indicated by blinking yellow Edit-LED. All data will be stored in the currently selected setup automatically by leaving the edit mode.
- Page 7 Command type (Button 3) Pot types: notE note command (note on for right side, note off for left side) control change command in 7 bit absolute mode (values 0 to 127) most used standard-mode program change command (values 0 to 127) Pbnd pitch bend command 14 bit (values 0 to 16383) Resolution 7 bit ! AFtt...
- Page 8 Command channel (Button 5) Ch01 ..choose midi channel 1 to 16 Command number (Button 6) n000 choose controller or note number 0 to 127 for note and CC commands 0 to 31 (MSB) for high resolution mode (32 to 63 for LSB follows automatically) Lower / upper value (Button 7 / 8) L000 choose lower value (0 to 127) for all command types except relative modes...
- Page 9 Setup mode The setup mode allows selection of setups and routings. Further you can copy and fill setups and parts, reset setups (factory reset) and send/receive setup data as sysex (backup/restore). Start and leave setup mode by holding down red shift key and press blue setup key. The activated setup mode is indicated by blinking yellow setup-LED.
- Page 10 Chr8 set channel numbers of all pots in ascending order to rows (8 track mode) (row 1= channel#, row 2= channel# + 1, row 3= channel# + 2,…) Chr4 set channel numbers of all pots in ascending order to rows (4 track mode) (rows 1/2 = channel#, rows 3/4 = channel# + 1, rows 5/6 = channel# + 2,…) Chr2 set channel numbers of all pots in ascending order to rows (2 track mode)
- Page 12 User manual PC44 version 1 Mathias Fuchß Software-Entwicklung Op’n Idenkamp 13a 22397 Hamburg Germany info@faderfox.de www.faderfox.de...