Gigabyte GA-7VA User Manual page 28

7) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It
will blink when the system enters suspend mode. If you use dual color LED, power LED will turn
to another color.
8) F_PANEL (2x10 pins connector)
Please connect the power LED, PC peaker, reset switch and power switch etc of your
chassis front panel to the F_PANEL connector according to the pin assignment above.
HD (IDE Hard Disk Active LED)
(Blue)
SPK (Speaker Connector)
(Amber)
RES (Reset Switch)
(Green)
PW (Soft Power Connector)
(Red)
MSG(Message LED/Power/
Sleep LED)(Yellow)
NC( Purple)
GA-7VA Motherboard
Pin No. Definition
1 MPD+
2 MPD-
1
3 MPD-
Soft Power
Connector
Message LED/Power/
Sleep LED
PW-
MSG-
SPK+
PW+
MSG+
1 1
2 1
1
1
1
HD+
IDE Hard Disk
HD- NC
Active LED RES-
RES+
Reset Switch
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
- 22 -
Speaker
Connector
SPK-
20
19