Superimpose - JVC HR-VP470U Instructions Manual

[VP670U]
OK
[VP470U]
1
4
7
1
MENU
To recall an indication
1
Press OSD.
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, are left displayed on the screen.
2 Press OSD again to clear the display.
The RECORD/PAUSE indication is left displayed on
the screen.
The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for 5
Stereo program indication
(HR-VP670U only)
Second Audio Program indication
(HR-VP670U only)
Tape position indicator
CH
CH
2 3
2
5 6
8 9
0
4
OK
SHUTTLE PLUS
CH 125
seconds.
THU 12:00 AM
STEREO
Clock time SAP
B
NORM
HI–FI
Audio mode indications
(HR-VP670U only)

Superimpose

This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5 ∞ or SHUTTLE PLUS% fi , then press OK
or SHUTTLE PLUS
SELECT SUPERIMPOSE SET
MODE
HR-VP670U
FUNCTION
AUTO PICTURE
PICTURE CONTROL
AUTO TIMER
=SUPERIMPOSE
AUTO SP = EP TIMER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
3
Move the highlight bar (arrow) to "SUPERIMPOSE" by
pressing CH5 ∞ or SHUTTLE PLUS% fi , then press OK
or SHUTTLE PLUS
a– Select "ON" if you want the superimposed opera-
tional indications on the TV screen.
b– Select "OFF" if you do not want the superimposed
operational indications on the screen.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
If you engage the Record Pause mode, RECORD/PAUSE is
displayed regardless of the Superimpose mode setting.
If you select a channel on which no signal is received, the
channel number is displayed regardless of the Superimpose
mode setting.
RECORD
PAUSE
] SP
+ + +
E
INDEX-1
COUNT –1:23:45
Counter reading
.
HR-VP470U
FUNCTION
ON
AUTO PICTURE
AUTO PICTURE CONTROL
OFF
AUTO TIMER
=SUPERIMPOSE
ON
AUTO SP = EP TIMER
OFF
VIDEO STABILIZER
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
to select the desired mode:
Operation mode
When the operation mode is changed,
the new mode is displayed — RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
Tape speed indication
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
INDEX indication
23
EN
ON
AUTO
OFF
ON
OFF
OFF