Picture Control; Video Stabilizer - JVC HR-VP470U Instructions Manual

Picture Control

This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5 ∞ or SHUTTLE PLUS% fi , then press OK
or SHUTTLE PLUS
SELECT PICTURE CONTROL
SET MODE
HR-VP670U
FUNCTION
AUTO PICTURE
=PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
3
Move the highlight bar (arrow) to "PICTURE CON-
TROL" by pressing CH 5 ∞ or SHUTTLE PLUS % fi ,
then press OK or SHUTTLE PLUS
desired mode.
AUTO*: Normally select AUTO.
It automatically adjusts the picture quality.
* When AUTO PICTURE is set to OFF (
20) , you can only select NORM instead of
AUTO.
EDIT: Select when you dub tapes.
SOFT: Select when you want to soften the picture.
SHARP: Select when you want to sharpen the picture.
NOTE:
• When you select EDIT, SHARP or SOFT, the
selected mode will not change until you select again.
• When you select EDIT to dub tapes, be sure to
select AUTO (or NORM when AUTO PICTURE is set
to OFF) after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
Select EDIT when you are dubbing tapes. Refer to page 37.
.
HR-VP470U
FUNCTION
ON
AUTO PICTURE
=PICTURE CONTROL
AUTO
OFF
AUTO TIMER
ON SUPERIMPOSE
AUTO SP = EP TIMER
OFF

VIDEO STABILIZER

SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
to select the
Video Stabilizer
By activating the Video Stabilizer you can correct vertical
vibrations in the picture when playing back unstable recordings
that were made on another VCR. When this function is set to
"ON", vertical vibration will be automatically corrected. *The
default setting is "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar
(arrow) to "FUNCTION
SET" by pressing CH 5 ∞ or
SHUTTLE PLUS % fi, then
press OK or SHUTTLE
PLUS
ON
AUTO
ACTIVATE VIDEO
OFF
ON
STABILIZER
OFF
OFF
=AUTO PICTURE
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
pg.
PRESS (MENU) TO END
3
PREVIOUS PAGE
=VIDEO STABILIZER
2ND AUDIO RECORD
AUDIO MONITOR
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
When you finish viewing the tape, be sure to set it back to
"OFF".
Regardless of the setting, this function has no effect during
recording and during special-effects playback.
The Superimpose mode indications may jitter vertically when
"VIDEO STABILIZER" is set to "ON".
To watch recordings with close-caption, it is necessary to set
the Video Stabilizer function to "OFF".
= FUNCTION SET
TUNER SET
INITIAL SET
.
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
HR-VP670U
FUNCTION
ON AUTO PICTURE
AUTO PICTURE CONTROL
OFF AUTO TIMER
SUPERIMPOSE
ON
AUTO SP = EP TIMER
OFF
=VIDEO STABILIZER
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Move the highlight bar
(arrow) to "VIDEO
ON
STABILIZER" by pressing
OFF
CH 5 ∞ or SHUTTLE PLUS
HI-FI
% fi, then press OK or
SHUTTLE PLUS
"ON".
21
EN
MAIN MENU
HR-VP470U
FUNCTION
ON
AUTO
OFF
ON
OFF
ON
to set to