Playback Features - JVC HR-V600AA Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-V600AA:
Table of Contents

Advertisement

– Playback –
Reverse
Reverse
Reverse
Reverse
slow
search
play
motion
3 steps
1 step
When the tape is not running
Rewind/fast-forward
Press
or
.
3
5
Eject the tape
Press
.
0
You can also eject the cassette when the recorder is turned off.
Turn off the recorder
Press 1.

Playback Features

Adjusting tracking condition
— tracking adjustment
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic tracking
starts working and continuously analyzes the signal to enable
optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, follow the procedures below.
A
Press SP/LP/EP (p) on the remote control during playback to
activate manual tracking.
B
Press PR + and – to eliminate the noises. Press it briefly for a
fine adjustment, or press and hold for a coarse adjustment.
Press SP/LP/EP (p) again to reactivate automatic tracking.
Soundtrack Selection
Your recorder is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
Pressing AUDIO changes the soundtrack being played back as
follows:
HI-FI: Normally select this. Hi-Fi sound is played back.
HI-FI L: Sound on the left Hi-Fi channel is played back.
HI-FI R: Sound on the right Hi-Fi channel is played back.
NORM: Sound on the normal track is played back.
NORM HI-FI: Both sounds on the Hi-Fi track and normal track are
mixed and played back.
NOTE:
The above indication appears when "O.S.D." is set to "ON"
(
10), though the monitor sound changes in sequence.
Automatic operations after rewinding
— Next Function Memory
The Next Function Memory "tells" the recorder what to do after
rewinding is complete. Ensure that the recorder is in stop mode.
For Automatic Playback Start
Press
, then press
within 2 seconds.
3
4
For Automatic Power Off
Press
, then press 1 within 2 seconds.
3
For Automatic Timer Standby
Press
, then press # within 2 seconds.
3
Forward
Slow
Normal
Forward
motion
play
search
1 step
4 steps
NOTE:
It is not possible to select the Automatic Timer Standby function if
the cassette's record safety tab is removed.
Playing back tape repeatedly (100 times)
— Repeat Play
During playback, press and hold
play indicator (
) on the display panel starts blinking slowly. To
$
stop playback, press
recorder.
NOTE:
Pressing
,
,
4
3
5
Locating beginning of recordings
— Index Search
Index codes are placed on the tape at the beginning of each
recording when recording on this recorder.
A
While the tape is not running, press
the remote control to start search.
B
To access a recording of 2 to 9 index
codes away, press
) repeatedly until the correct
6
number is displayed on the screen
(only if "O.S.D." is set to "ON"
(
10)). Playback begins
automatically when the desired
recording is located.
Beginning of the
current program
recorded
Previous
program
recorded
Locating beginning of timer recordings
— Instant Review
After ensuring that the recorder is turned off and that the timer
mode is disengaged, press REVIEW on the remote control.
The recorder turns on, and rewinds to the index code indicating
the beginning of the last timer-recorded program, then begins
playback automatically.
You can access a program of 2 to 9 index codes away from the
current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press
REVIEW three times.
The Instant Review function will also operate if the recorder is
turned on.
Skipping unwanted portions
— Skip Search
Press 30 SEC
on the remote control once to 4 times during
playback. Each press initiates a 30-second period of high speed
playback (up to 2 minutes). When the specified portion of the tape
is skipped, normal playback resumes automatically. To return to
normal playback during Skip Search, press
— 6 —
for more than 5 seconds. The
4
on the remote control or
8
0
or
also cancels repeat playback.
9
or
(
w
e
2
or
(
or
w
e
2
Beginning of the
Current
position on
2nd next program
recorded
the tape
Next
2nd next
program
recorded
.
4
on the
or
) on
6
6 2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-v600agHr-v600ex

Table of Contents