Dasarobot Genibo-QD User Manual page 36

Instructions for Use
Playing and Deleting Voice Memos
To play or delete a recorded memo in the Genibo, follow the direction below.
 Click '3' then 'OK' on the remote control. The Genibo will stop all actions and
speak a recorded memo.
 It will play the memo first recorded, and show memo number on LED.
 Press OK to stop playing. A voice will say, "Do you want to delete the memo?"
Press OK to delete it. To cancel the deletion, press ESC or wait for 3 seconds.

 After deletion is complete, the next data will be played. If the deletion was
canceled, the previous memo will play after the point when OK was pressed.
 To skip the memo, use the  /  left/right button.
 Once the memo is played out, a voice says, "No more memo to play."
The Genibo will return to Autonomous Mode.
Press "ESC" while playing a memo, play will be finished immediately and the

robot will be back to Autonomous Mode.
[Tip] While recording, playing, and erasing a voice memo, the Genibo will not respond to
external touch, a voice or a cliff.
Voice memo function will be stopped when the AC adapter is connected or the "Control
Manager" program is connected.