Porsche Boxster Owner's Manual page 201

The position and accessibility of the joint rods
change depending on the position of the converti-
ble top. It can be helpful to fold up the rear part of
the convertible top.
4. Lever joint rod D (black fastening) off the ball
head with blade of lever B. As the connection is
under spring tension, a corresponding amount
of force is required to lever off the ball head,
creating danger of crushing and pinching.
5. When levering off joint rod D on the other
side of the vehicle, the convertible-top
compartment cover must be held so that it
does not fall down in an uncontrolled manner
to protect against injury from a fallen cover.
6. Grasp convertible-top compartment cover in
the center and set up completely (arrow).
7. Lever joint rod E (white fastening) off the ball
head with blade of lever B. A corresponding
amount of force is required to lever off the
ball head, creating danger of crushing and
pinching.
8. When levering off joint rod E on the other side
of the vehicle, the convertible top must be held
so that it does not fall down in an uncontrolled
manner to protect against injury from a fallen
cover.
9. Lift convertible top with both hands (arrow)
and close.
10. Lock convertible top.
11. Carefully lower convertible-top compartment
cover.
Caution!
Danger of damage at the convertible top.
After emergency operation, do not operate the
convertible top with the rocker switch.
Mobile Roofs
199