Valentin Solo type Service Manual page 34

error message

no Memory-Card

not enough memory

write protected

wrong type of Mem-Card

label exists already

no label exists

unknown error

serial EEPROM

printing active

command statement wrong

overrun

framing

parity
possible causes

Memory-Card not / not
correctly entered

max. storage space of
Memory-Card is reached

"Write Protect"-switch on
Memory-Card is "ON"

wrong Memory-Card
entered (256 K)

label name already stored
on Memory-Card

label name not stored on
Memory-Card

internal storage error on
Memory-Card

max. write cycles reached

when copying a Memory-
Card whilst print command
is active
 invalid command statement 

receiving byte is written
though it hasn't been
cleared yet

wrong Baudrate

wrong parity
30
how to solve the problem

enter Memory-Card

use a new Memory-Card

delete files on Memory-
Card that are no longer
needed

use a new Memory-Card

deactivate write protection

check type of Memory-Card
and

enter Memory-Card 128 K

change label name

search through the contents
of the Memory-Card and
select the desired name

store data anew

use a new Memory-Card

change EEPROM

wait until printer is ready
check command statement
and change

transmit anew

Please contact your
distributor.

check Baudrate and change

check parity and change
Service manual