Atwood AC-1361 Installation Operation & Maintenance page 6

CONNECT AC ELECTRICAL SUPPLY
Installation must conform to local wiring codes and regulations or, in the absence of local codes, the Standard
on Recreational Vehicles, NFPA 1192. and National Electrical Code NFPA 70.
- Connect AC power supply to wire leads from unit
- Note:
Brown wire from rooftop unit to Black or Red wire from customer – AC Hot
Blue wire from rooftop unit to White wire from customer – AC Common
Yellow/Green wire from rooftop unit to Green wire from customer – Ground
WARNING
Ensure that power is properly disconnected at the supply (mains and/or battery).
Failure to do so may result in damage to the unit and personal injury or death.
AC connections can be made following the COC-1 procedure below using the connector: Atwood PN 15024.
COC-1 Self Contained Power Connector Installation Instructions
The 2-circuit-with-ground connectors will splice non-metallic-sheathed cable in the following wire ranges and types:
Self Contained Connector -
2 Circuit with ground for Solid Wire
Order Optional
Wire Range
AWG No. Hand Tool
12-14 19045-1000 19285-0074
(COC-1)
Reference Information
UL File Number: E182087,
CSA File Number: LR18689-C53
NEC Article: 550, 551, and 545
HUD Section: 3280.801
Current: 20A,Voltage: 300V
AC IOM DUCTED 7/31/2013 rev 3
For 2 Wire Cable With Ground Applications
Optional Bench Optional Bench
Mount Tool Arbor Press
N/A 64006-0200
Housing
Color
White
6
FIG. 2