Table of Contents
Advertisement
Preface
Safety Precautions
1.
Read these safety instructions carefully.
2.
Keep this User Manual for later reference.
3.
Disconnect the equipment from an AC power outlet prior to install-
ing a component inside the chassis.
4.
To prevent electrostatic build-up, leave the board in its anti-static bag
until you are ready to install it.
5.
Keep the board away from humidity.
6.
Put the board on a stable surface. Dropping it or letting it fall may
cause damage.
7.
Do not leave the board in either an unconditioned environment or in
a above 60
o
C storage temperature as this may damage the board.
8.
Wear an antistatic wrist strap.
9.
Do all preparation work on a static-free surface.
10. Hold the board only by its edges. Be careful not to touch any of the
components, contacts or connections.
11. All cautions and warnings on the board should be noted.
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
12. Use the correct mounting screws and do not over tighten the screws.
13. Keep the original packaging and the anti-static bag; in case the
board has to be returned for repair or replacement.
viii
EBC 352 User Manual
Advertisement
Table of Contents
