Chipset - Nexcom EBC 352 User Manual

Chapter 3: BIOS Setup

Chipset

This section is used to configure the system based on the specific features
of the chipset.
Setting incorrect field values may cause the system to malfunc-
tion.
BIOS SETUP UTILITY
Main Advanced Boot
Advanced Chipset Settings
WARNING: Setting wrong values in below sections may cause system
to malfunction.
North Bridge Configuration
u
South Bridge Configuration
u
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
Security Chipset Exit
Configure North Bridge
features.
Select Screen
← →
Select Item
↑↓
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
North Bridge Configuration
North Bridge Chipset Configuration
PCI MMIO Allocation: 4GB to 3072MB
Initiate Graphic Adapter
Internal Graphics Mode Select
PEG Port Configuration
DVMT Mode Select
DVMT/FIXED Memory
Boot Display Device
Flat Panel Type
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Initiate Graphic Adapter
Selects the graphics controller to use as the primary boot device.
Internal Graphics Mode Select
Selects the internal graphics mode.
42
BIOS SETUP UTILITY
Chipset
Select which graphics
controller to use as the
primary boot device.
[IGD]
[Enabled, 8MB]
[DVMT Mode]
[256MB]
[CRT + LVDS]
[1024x768 18bit S]
Select Screen
← →
Select Item
↑↓
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
EBC 352 User Manual