To Assign The Static Ip Address Using Telnet - Symmetricom 5087B Operation And Maintenance Manual

To assign the static IP address using Telnet

Symmetricom 5087B Operations and Maintenance Manual Rev. E
Installing and Setting Up the Symmetricom 5087B
The hardware device number and IP address appear in the Assign IP
Address dialog box.
Type the new IP address and click OK.
6
The new IP address appears in the Lantronix® DeviceInstaller
window.
Test the IP address by pinging the instrument's Xport™ on the
7
Lantronix Xport Installer window.
Click the Ping icon or select Ping Device on the Tools menu.
The Ping Device window should show the IP address of the
instrument's Xport™ device, and it should show successful replies if
the IP address has been configured correctly.
Exit the browser.
8
Telnet to the assigned address, port 9999.
1
Press Enter within five seconds to enter the setup mode.
2
Select Option 0.
3
Set the IP address and follow the on-screen instructions to save the
4
setting.
Telnet to the new IP address, port 10001.
5
Type I
6
You do not need to type a carriage return or line feed.
The system returns I5087B-00\r\n, where the 00 is the hardware
version, and turns on the front panel input LEDs for two seconds
before returning to normal operation.
If you see these responses, you know you are communicating with
the unit.
2
19