Maintenance; Spare Parts; Support Agreements - RaceAmerica 3850B Timer AC4 Owner's Manual

MAINTENANCE

The Model 3850 TIMER AC4 Console,
Beam Emitters, and Track Sensors do not require
any maintenance.
To insure uninterrupted operation on raceday,
it is suggested to keep track of battery usage hours
so as to have fully charged batteries. Plan to replace
the alkaline AA cells in the Beam Emitters after
about 60 hours use. If you are using rechargeable
AA cells, recharge them each day. Low battery
voltage (Emitters below 4.2V DC) will cause
intermittent operation of the system resulting in
intermittent trips detected at the starting line or the
finish line as the battery power weakens. T-Link2
units ontain Li-Ion batteries which have a charger
of their own. Take special care to use the correct
charger for different batteries.
To maintain the highest level of timing
accuracy and minimize false trips, annual
preventative maintenance and calibration should
be performed on all system track sensors and beam
emitter units.

SPARE PARTS

Further to minimize race program
interruptions, RaceAmerica recommends some
spare parts. A spare emitter/sensor pair and
sensor cable should be available in the event of an
unfortunate accident during a program. Contact
RaceAmerica for availability and pricing of spares
items.

SUPPORT AGREEMENTS

Support agreements are available from
RaceAmerica providing Telephone Assistance on
technical issues and operational questions, repair
and/or replacement of hardware failures, Software
and Firmware updates and bug reporting, and
Annual Preventative Maintenance on all system
track sensors and beam emitter units. Contact
RaceAmerica for more information and pricing
of Support Agreements.
RaceAmerica Model 3850 Timer AC4
22