Hitachi RAS-10G5 Service Manual page 53

Common, etc.
There is a difference between
Q6
the room temperature setting
and actual room temperature.
What will happen if the time
Q7
setting is changed while in a
timer operation?
Nice temperature reservation
In case of "ON" timer, the operation does
Q8
not start at a preprogrammed time but a
little earlier.
The time to start an operation is irregular
Q9
while preprogramming at the same time.
After selecting a "Dehumidifying" operation
Q10
mode, the fan speed mode remains "LO"
fan speed".
There may be a difference
A6
b e t w e e n t h e
temperature setting and
actual room temperature
on account of the room
structure, air fl ow, etc.
If there is a difference from
the room temperature, adjust
the set temperature to keep
living space at a comfortable
temperature.
A timer operation is performed
A7
until the time after changing
the time setting.
The "Nice temperature reservation" functions.
A8
The operation starts earlier so the room
temperature will be as set at a programmed
time.
The operation starts at most 60 minutes before
a preprogrammed time.
The "Nice temperature reservation" operates.
A9
The starting time depends on the room load.
At a "Dehumidifying" operation, the "LO" fan
A10
speed" is forcibly selected.
– 57 –
r o o m