Dometic RMH 7390 L Operating Instructions Manual page 8

Manual Ignition
1. Open the valve of the gas cylinder.
2. Open the shut-off valve to the gas supply.
A
7. Release igniter button (C). Keep rotary switch (B) depressed for another 10-15
seconds, then release.
8. Check the flame indicator device to see whether a flame is burning.
9. Repeat the entire process if the flame has gone out.
10. Use rotary switch (B) to regulate the temperature in the main refrigerator
compartment.
5.2.4
Temperature setting cooling compartment
The cooling unit's performance is influenced by ambient temperatures.
Please select the medium setting for ambient temperatures between
T T I I P P
+15°C and +25°C. The unit operates within its optimum performance range.
Dometic refrigerators work according to the absorption principle.
Due to physical reasons, an absorption system responds slowly to changes
made on the thermostat controller, or a loss in cooling through opening the
door, or storing food. The devices fulfill the cooling performance require-
ments of the Climatic Class SN acc. to EN/ISO 7371 in the temperature
range of +10°C to +32°C ambient temperature.
3. Set energy selector
switch (A) to gas.
5. Activate Piezo
C
ignition (C)
several times at
intervals 1-2
seconds.
As shown, you are able to regulate the temperature of
B
the cooling compartment, if necessary, by turning
rotary knob (B) .
medium setting
8
4. Press and hold
rotary switch (B).
B
6. Check the inspection glass
to see whether there is a
flame (the inspection glass
is inside the refrigerator at
the bottom left).