JVC HR-S5600AM Instructions Manual page 39

AUDIO
1 2 3
2
4 5 6
8 9
7
0
4
1
PLAY
STOP
5
6
NOTES:
When monitoring the sound during Audio Dubbing, the normal
soundtrack is automatically selected. If you wish to hear the
mixed sound (Hi-Fi + Normal soundtracks), press AUDIO on
the remote control to select "
( pg. 16).
Audio dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode. Check the
counter reading before dubbing.
Audio dubbing is also possible using the rear panel AUDIO
IN L + R connectors. When using these connectors, make
sure to select the correct input mode in step 2.
Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
When playing back an audio-dubbed tape, press AUDIO on
the remote control to select the soundtrack you wish to hear
( pg. 16).
PAUSE
START DUBBING
Engage the audio component's Play mode, then press
PLAY to start the tape in your recorder. Audio dubbing
begins at this point.
" " blinks and " " is displayed on the front display
panel.
To stop dubbing temporarily, press PAUSE. Press
PLAY to resume dubbing.
END AUDIO DUBBING
Press STOP to stop the tape in your recorder, and
engage the audio component's Stop mode.
NORM
39
EN
(HI FI + NORM)"