Table of Contents
Advertisement
1
4
NUMBER
7
STOP+/–
PROG
1
Satellite Tuner Users
To timer-record a satellite broadcast using the G-
system:
1 Perform steps 1 – 6.
2 Set the satellite tuner to the appropriate channel before
the selected programme begins.
3 Leave the satellite tuner's power on.
2
3
2
5
6
WEEKLY
8
9
TIMER
0
4
OK
PUSH JOG
CODE
RETURN TO NORMAL
SCREEN
5
Press PROG or OK. "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen
appears.
Repeat steps 1 – 5 for each additional programme.
ENGAGE RECORDER'S
TIMER MODE
6
Press TIMER. The recorder turns off automatically and
"‰" appears on the display panel.
To disengage the timer, press TIMER again.
NOTES:
To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays this
way.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
"9") for weekly serials or DAILY (NUMBER key "8") for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (
pg. 30).
It is not possible to timer-record a TV programme with a
G-
number which starts with "0".
CODE
ATTENTION
Regarding Guide Program Number Set
"G-CODE SET-UP" appears after performing step 3 if the
Guide Program number for the G-
has not been set.
Press the NUMBER keys or PUSH JOG %fi to input the
channel position number on which your recorder
receives that station, then press OK or PUSH JOG
The G-
program screen appears.
CODE
G-CODE SET-UP
GUIDE PROG
TV PROG
2
– –
[0-9] OR [5/ ∞ ]:SELECT =
[PROG] : EXIT
27
EN
number you entered
CODE
.
(Ex.) To timer-record a RTR
programme with the G-
CODE
system.
* If your recorder receives
RTR on the channel position
2, press OK or PUSH JOG
after entering "2".
Hide quick links:
Advertisement
Table of Contents
