Table of Contents
Advertisement
Installation
Hardware Installation：
Plug the BiPAC 2060G Powerline Access Point into an outlet
Connecting a Wireless Device to the Access Point：
If you are connecting to the BiPAC 2060G Access Point with a
wireless/Homeplug device, all wireless configuration parameters must be
configured to match.
an IP address .There are two ways for your wireless network
adapter to obtain an IP address:
Obtain an IP address automatically from a router on your
Attention
The default setting for Homeplug Access Point
Wireless-G Powerline Adapter default setting
1
Default IP
2
User name
3
Password
4
SSID
5
Channel
6
WEP
7
Network Password
Billion BiPAC 2060G Wireless-G Powerline Adapter
To connect to your BiPAC 2060G Access Point you must have
Typical Setup
Powerline network.
Advanced
If your router does not have a DHCP server, you will need to
manually configure a static IP address for your wireless
adapter that is on the same subnet as your other network
192.168.1.253
admin
admin
default
11
off
HomePlug
- 5 -
Advertisement
Table of Contents
