Connections And Plug&Play Setting - JVC HR-S2913U Instructions Manual

Remote
CANCEL
On-screen display
If you press OSD (OK) on the Remote when "SUPERIMPOSE" is
set to "ON" ( pg. 13), you can see the current VCR status on the
TV screen. The indications are not recorded even if the VCR is in
the recording mode.
Channel and
Timer warning display
auxiliary input
Day and
CH125
clock time
THU 12:00 AM
STEREO
STEREO
SAP TIMER RECORDING
program
TO START SOON
indication
SAP +
B
indication
NORM
Audio
HI-FI
monitor
indications
To recall an indication
A Press OSD (OK).
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE (if in the Record Pause
mode), are left displayed on the screen.
B Press OSD (OK) again to clear the display.
The RECORD/PAUSE indication is left displayed on the
screen.
TIMER
VCR operation
mode
RECORD
PAUSE
Tape speed
–WARNING– SP
Cassette mark
(CANCEL)
Tape position
+ + E
INDEX 1
Index number
REMAIN 10:00
COUNT – 1:23:45
Tape
remaining time
Time counter
Connections and Plug&Play
Setting
A
Check contents
Make sure the package contains all of the accessories listed in
"Specifications" (
B
Situate VCR
Place the VCR on a stable, horizontal surface.
C
Connect VCR to TV
Antenna or cable
Flat feeder
Matching transformer
AC power cord
Back of VCR
AC outlet
To audio/video
input connectors
TV
To S-video input
connector
RF Connection
A Disconnect the TV antenna from the TV.
B Connect the TV antenna cable to the ANT. IN terminal on the
rear of the VCR.
C Connect the supplied RF cable between the TV OUT terminal
on the rear of the VCR and the TV's antenna input terminal.
AV Connection
(improves picture quality during tape playback.)
If your TV is equipped with audio/video input connectors
A Connect the antenna, VCR and TV as shown in the illustration.
B Connect an audio/video cable between the AUDIO/VIDEO
OUT connectors on the rear of the VCR and the audio/video
input connectors on the TV.
— 6 —
pg. 16).
Coaxial cable
(not supplied)
S-VIDEO
Audio/video
cable
(not supplied)
To 75 terminal
RF cable
(supplied)
S-video cable
(not supplied)
CONTINUED ON NEXT PAGE