Playback Features; Repeat Play; Index Search; Tracking Adjustment - JVC HR-S1902U Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-S1902U:
Table of Contents

Advertisement

Reverse
Reverse
Reverse
Reverse
search
slow
play
3 steps
motion
1 step
When the tape is not running
Rewind/fast-forward
Press REW (
) or FF (
3
5
Eject the cassette
Press STOP/EJECT (
).
0
You can also eject the cassette when the VCR is turned off.
Turn off the VCR
Press POWER 1.

Playback Features

Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Adjusting tracking condition

— Tracking Adjustment

Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic tracking
starts working and continuously analyzes the signal to enable
optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, follow the procedures below.
On the Remote
A
Press SP/EP during playback to activate manual tracking.
B
Press CH
/
to eliminate the noises. Press it briefly for a fine
r
t
adjustment, or press and hold for a coarse adjustment.
Press SP/EP again to reactivate automatic tracking.
Selecting monitor sound

— Audio Monitor

While playing back a tape on which stereo sound or SAP sound is
recorded, press A.MONITOR on the Remote. Each time you press
the button, sound changes.
HI-FI: Normally select this. Hi-Fi sound is played back.
HI-FI L: Sound on the left Hi-Fi channel is played back.
HI-FI R: Sound on the right Hi-Fi channel is played back.
NORM: Sound on the normal track is played back.
NORM HI-FI: Both sounds on the Hi-Fi track and normal track are
mixed and played back.
NOTE:
The above indication appears when "SUPERIMPOSE" is set to
"ON" (
pg. 12), though the monitor sound changes in
sequence.
Automatic operations after rewinding

— Next Function Memory

The Next Function Memory "tells" the VCR what to do after
rewinding is complete. Ensure that the VCR is in stop mode.
For Automatic Playback Start
Press REW (
), then press PLAY (
3
For Automatic Power Off
Press REW (
), then press POWER 1 within 2 seconds.
3
Forward
Slow
Normal
Forward
motion
play
search
1 step
4 steps
).
) within 2 seconds.
4
For Automatic Timer Standby
Press REW (
), then press TIMER within 2 seconds.
3
NOTE:
It is not possible to select the Automatic Timer Standby function if
the cassette's record safety tab is removed.
Playing back tape repeatedly (100 times)

— Repeat Play

During playback, press and hold PLAY (
5 seconds. The play indicator (
blinking slowly. To stop playback, press STOP (
or STOP/EJECT (
0
Locating beginning of recordings

— Index Search

When recording on this VCR, index codes are placed on the tape
at the beginning of each recording.
A
While the tape is not running, press
to start search.
B
To access a recording of 2 to 9 index
codes away, press
repeatedly until the correct number is
displayed on the screen (only if
"SUPERIMPOSE" is set to "ON"
(
pg. 12)). Playback begins
automatically when the desired
recording is located.
Beginning of the
current program
recorded
Previous
program
recorded
Locating beginning of timer recordings

— Instant Review

After ensuring that the VCR is turned off and that the timer mode is
disengaged, press REVIEW.
The VCR turns on, and rewinds to the index code indicating the
beginning of the last timer-recorded program, then begins
playback automatically.
You can access a program of 2 to 9 index codes away from the
current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press
REVIEW three times.
The Instant Review function will also operate if the VCR is
turned on.
Skipping unwanted portions

— Skip Search

Press SKIP SEARCH on the Remote once to 4 times during
playback. Each press initiates a 30-second period of high speed
playback (up to 2 minutes). When the specified portion of the tape
is skipped, normal playback resumes automatically. To return to
normal playback during Skip Search, press PLAY (
— 8 —
) for more than
4
) on the display panel starts
$
8
) on the VCR.
or
2
6
or
2
6
Current
Beginning of the
2nd next program
position on
recorded
the tape
Next
2nd next
program
recorded
) on the Remote
on the Remote
).
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-s1902us

Table of Contents