Sector Setting - Carbest 49651 User Manual

Carbest
For positive values it is necessary to rotate the LNB CLOCKWISE, using the "zero" indication on
the LNB support
COUNTERCLOCKWISE. As displayed in the following pictures, to perform this operation
unscrew with an 3mm Allen wrench the two screws that fix LNB and rotate the LNB until the
desired value is displayed in the hollow of the upper plate.
In some cases corrections lower than 15° can be avoided, if the signal has already a good
quality without manual re-positioning.
For manual antenna positioning it is necessary that satellite receiver and TV set are switched
on, in order to evaluate correctly the signal quality.
To activate manual positioning, go to SEARCH FOR SAT menu (see Menu Tree chapter) and
press UP/DOWN keys to activate SEARCH MODE menu.
SAT FOUND
< Sat name >
In the SEARCH MODE menu:
1. Press RIGHT/LEFT keys: the manual positioning feature is selected
2. Press OK: Manual positioning will be activated
3. Press UP key to raise antenna
4. Press DOWN key to lower antenna
5. Press RIGHT key to move the antenna clockwise
6. Press LEFT key to move the antenna counter-clockwise
7. During the positioning procedure verify on the satellite receiver and on the TV set the
signal presence, trying to maximize signal intensity.
8. Press OK to stop manual positioning. If the system detects a good signal it will go
automatically to the SAT FOUND menu. If no signal is detected the system will activate
again the SEARCH FOR SAT menu.

3.4. Sector setting

1. Go to SEARCH MODE menu (see Tree Menu chapter) and select AUTOMATIC
2. Press OK: automatic search is selected.
3. Press RIGHT/LEFT keys to select one of the following items:
 ALL SECTORS
 NORTH EUROPE
 CENTER EUROPE
 SOUTH EUROPE
4. Press OK to terminate selection. The SEARCH FOR SAT menu is activated.
as reference. For
SEARCH FOR SAT
< Sat name >
negative values
Page 7 of 12
User's manual
the arm must be
SEARCH MODE
AUTOMATIC
rotated