Tanita MC-180MA Instruction Manual page 8

Various settings
GB
• Check:
Power switch
(back)
"Athletic"
• It is recommended to select
"Athletic" for individuals aged 18
or more who consider themselves
to be athletes or to whom the
following conditions apply, and
to use measured values for
reference.
• People who do 12 or more
hours of training (exercise) a
week
• Members of gymnastics or sports
organizations aiming to
participate competitively
• People such as bodybuilders who
• When various settings are performed in sequence,
undergo training to build up
muscles
• Set details are retained until next modified.
• Sports professionals
14
How to set (continued)
Is the procedure as per page 12 complete?
Setting the measurement mode
(continued from page 12)
3 On the "Setting item selection" screen,
(1) Press (Measurement mode)
2
• The "Measurement mode
selection" screen is displayed.
(The default setting when
shipped is shown as the
following screen.)
(2) Select functions
• Athletic selection e Decide whether or not to select
"Athletic" on the screen as the "Body Type".(
• Unit to input height e Input and output units can be
switched between millimetres and centimeters.
• Decide whether or not an ID number is to be input. Any ID
number that is input is displayed, printed and output serially
together with measurement results.
Serial ID: Specify : [Check before measurement] to enable input of the
ID number. The input ID number is automatically increased serially after
each measurement.
ID : The ID number input screen is shown after measuring the weight (or
immediately after that if skipped). If [Check before measurement] it is
specified, the ID number can be changed. It does not increase serially
after measurement, and the next user must input their ID.
•Stand-by screen
e Select whether or not the stand-by screen display
function is to be activated or not. When
selected, the stand-by screen is displayed for five minutes
after the last operation while the measuring platform is
clear.
4
Press
Enter
• Returns to the "Setting item selection" screen. (
e Press each number to be set.
Notes
page 28)
• To terminate the input process,
e Press . (Returns to
Cancel
the "Setting item selection"
screen without changing any
details that have been set.)
indicates current selection,
and indicates alternative
options.
is
ON
page 12)
• Check:
Is the procedure as per page 12 complete?
Setting of screen display items
(continued from page 12)
3 On the "Setting item
selection" screen:
(1) Press
3
(Display item)
• The "Display item selection
– Body composition
analyzer (1)" screen is
d
displayed. (The default
setting when shipped is as
per the screen in the
right.)
(2) Select items to
be displayed
• Pressing the or
mark beside each item
switches the selection.
* Items marked with an are not displayed on the screen
for measurement results ( page 31) or the screen for
whole body details ( page 32).
Notes
• To terminate the input process,
e Press (Returns to the "Setting item
Cancel
selection" screen without changing any items to be
displayed on the screen.)
• To terminate the input process,
e Press Cancel (Returns to the "Setting item selection"
screen without changing the date and time.)
• To re-input the previous item,
e Press (The previous input item is selected.)
Back
4
Press
Enter
• Returns to the "Setting item selection" screen.
( page 12)
• Once all settings have been made,
e Press Back on the "Setting item selection" screen. (Returns to
the initial screen.)
GB
Press Next
15