Getting started Thank you very much for purchasing the SR-901 Moistening the electrodes 6-pack Analyser, the latest How to get good readings innovative product from How to take a measurement TANITA. Results Table This instrument, the abdominal (abs) subcutaneous fat meter, is to measure the subcutaneous fat thickness of the abdomen.
Getting started Moistening the electrodes Insert the batteries • Insert water in the spray 1. Open the battery cover by loosening the bottle 2 screws with the supplied screwdriver. • Moisten the 4 electrodes 2. Put the + side of the batteries as with water from the indicated, close the battery cover and spray bottle...
How to get good readings How to take a measurement • Do not measure directly after excessive eating and drinking, • Turn the power on or when dehydrated. • The 6-pack Analyser gives a • In order to see the trend; measure at “Beep”...
Results table • The electrodes will start to measure. Keep the instrument Through research Tanita has in place until you have heard determined a 5 stage indication the “beep beep” sound. The regarding the thickness of the measurement is completed subcutaneous fat.
Page 6
Specifications Useful information Measuring BI method (reactance technology) The parts technology Liquid crystal display No. patented No. 5314099 Front Gender Male / female Display Display Abdominal subcutaneous fat Power on/off button content thickness. Thickness of 0.3cm ~ Gender selection button 5.0cm (0.1cm units and 5 stage Set button decision)
“Er” is displayed Place the batteries as indicated. This is a measurement error. Please measure Do not use this instrument when again. you have a Pacemaker or another electronic medical implant. The Check if the electrodes are dry, always measure instrument passes a low level electrical with 4 moist electrodes.