Tanita MC-180MA Instruction Manual page 16

How to measure
GB
9 In the case of 18 year-old or Confirm input details
older with ID
After confirmation, if setting (input) details are correct, press
measurement to start the measurement.
• To change or correct input details,
In the case when "Athletic" is
not selected or 17 year-old
or younger without ID
10
s
Hold the handgrips lightly, and let the
arms hang down naturally.
Notes
• When is pressed, returns to the "Data Chack" screen.
Back
• When is pressed, returns to the "Weight Measurement – Now preparing"
Quit
screen, ( page 27)
11
(1) (2)
s
(4)
s s
• When
Notes Back
• When
Quit
screen, (
30
When used as a body
Notes
e Press Change for the item to be changed or corrected.
On each screen, when is pressed after input, the input
Enter
data is changed/corrected, and the screen returns to "Confirm input
details". When Back is pressed, the screen returns to "Confirm
input details" without changing the input data.
* No. (ID number) is not displayed when "OFF" is specified under "Setting of
measurement modes" ( page 14).
* No. (ID number) is sed at "0000000001" after the power is turned on. After it is
changed, the new value will be sed. (10 digits)
* 1 is automatically added to the No. (ID number) per measurement. (Maximum
9999999999)
* When "Athletic" is not selected (Refer to "Setting of measurement modes" (
14)) or in the case of 17 year-old or younger, the body type cannot be changed.
Feet should be positioned
on the heel and toe
electrodes on each side in
roughly equal proportions
as indicated in
following illustration.
<Child> <Adult>
(3)
s
Measurements for (1)whole
(5)
body, (2)left arm, (3)left leg,
(4)right arm, and (5)right leg,
are performed in that order.
is pressed, returns to the "Confirm input details" screen.
is pressed, returns to the "Weight Measurement – Now preparing"
page 27)
composition analyser (continued)
12
Start
13 Sample values for
18 year-old or older
page
the
Button to display details
Sample values for
17 year-old or younger
Correct
measurement
posture
Button to display details
Measurement completed.
Replace both handgrips.
Notes
• The external printer operates in accordance with the input details under
"Setting up the printer" ( page 16).
* This screen is not displayed when printer operation is set to
automatic printing after measurement is set to OFF
the printer" ( page 16).
Display measurement results
Notes
• Data is automatically output from the output port in accordance with the
communication setting as per page 20. ( page 48 for output details.)
• When Print is pressed, the external printer operates in accordance
with the details set under "Setting up the printer" (
* When is selected for printer operation, this button is not
OFF
displayed.
*When is selected for automatic ending after printing, it
ON
automatically returns to the "Weight Measurement – Now
preparing" screen ( page 27) once printing is complete.
• When the button to display details is pressed, the information details are
displayed. ( page 32.)
• If is specified for automatic ending after printing under "Setting up
OFF
the printer", when Quit is pressed, items other than the input
clothes weight (PT) and ID number are cleared, and it returns to the
"Weight measurement – Now preparing" screen (
is specified, it automatically returns to the "Weight Measurement –
ON
Now preparing" screen ( page 27).
GB
, or
OFF
under "Setting up
page 16).
page 27). When
31