JVC HR-J7005UM Instructions Manual page 77

1 2 3
2
4 5 6
7 8 9
0
4
CH
1
OK
4
5
NUMBER
6
7
ATTENTION CABLE BOX SUBSCRIBERS
In order to set the Guide Channel for a cable program,
you must select your cable box's output channel as the
VCR channel in step 6. If the cable box is connected to
your VCR's ANT. IN connector, select the cable box's RF
output channel. If the cable box is connected to your
VCR's VIDEO IN and AUDIO IN connectors, press
NUMBER key "0" and/or CH to select "F-1" (for the front
panel AUDIO/VIDEO connectors) or "L-1" (for the rear
panel AUDIO/VIDEO IN connectors) as the VCR
channel.
It is important that you keep the cable box ON and
tuned to the cable station of the program you want to
record until timer recording is completed.
ACCESS GUIDE CHANNEL
SET SCREEN
Press CH5 ∞ or % fi to
move the highlight bar
(arrow) to "GUIDE
CHANNEL SET", then
press OK or .
INPUT GUIDE CHANNEL
NUMBER
Press CH 5 ∞, % fi or the
appropriate NUMBER keys
to input the VCR Plus+
Guide Channel number as
shown in the TV listing.
Then press OK or .
INPUT RECEIVING CHANNEL
NUMBER
Press CH 5 ∞ , % fi or the
appropriate NUMBER keys
to input the number of the
channel on which the
Guide Channel's broad-
casts are received. Then
press OK or .
Repeat steps 5 and 6 for
each instance.
RETURN TO NORMAL
SCREEN
Press MENU.
29
EN
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
=GUIDE CHANNEL SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
(Ex.) When inputting the
Guide Channel number
6 for WNJU(Ind.)
GUIDE CHANNEL SET
GUIDE CH : 6
VCR CH : – – –
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
(Ex.) If WNJU(Ind.) is
received on channel 47
GUIDE CHANNEL SET
=
GUIDE CH : 6
VCR CH : 47
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END