Table of Contents
Advertisement
– Playback –
Automatic operations after rewinding
— Next Function Memory
The Next Function Memory "tells" the VCR what to do after
rewinding is complete. Ensure that the VCR is in stop mode.
For Automatic Playback Start
Press REW (
), then press PLAY (
3
For Automatic Power Off
Press REW (
), then press POWER 1 within 2 seconds.
3
For Automatic Timer Standby
Press REW (
), then press TIMER within 2 seconds.
3
NOTE:
It is not possible to select the Automatic Timer Standby function if
the cassette's record safety tab is removed.
Playing back tape repeatedly (100 times)
— Repeat Play
During playback, press and hold PLAY (
5 seconds. The play indicator (
blinking slowly. To stop playback, press STOP (
or STOP/EJECT (
) on the VCR.
0
NOTE:
Pressing PLAY (
), REW (
4
3
cancels repeat playback.
Locating beginning of recordings
— Index Search
Index codes are placed on the tape at the beginning of each
recording when recording on this VCR.
A
While the tape is not running, press
the Remote to start search.
B
To access a recording of 2 to 9 index
codes away, press
or
w
e
) repeatedly until the correct
6
number is displayed on the screen
(only if "SUPERIMPOSE" is set to
"ON")(
pg. 14). Playback begins
automatically when the desired
recording is located.
Beginning of the
current program
recorded
Previous
program
recorded
) within 2 seconds.
4
) for more than
4
) on the display panel starts
$
) on the Remote
8
), FF (
) or PAUSE (
) also
5
9
or
(
or
w
e
2
6
(
or
2
Current
Beginning of the
2nd next program
position on
the tape
recorded
Next
2nd next
program
recorded
Locating beginning of timer recordings
— Instant Review
After ensuring that the VCR is turned off and that the timer mode
is disengaged, press REVIEW on the Remote.
The VCR turns on, and rewinds to the index code indicating the
beginning of the last timer-recorded program, then begins
playback automatically.
You can access a program of 2 to 9 index codes away from the
current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press
REVIEW three times.
The Instant Review function will also operate if the VCR is
turned on.
Skipping unwanted portions
— Skip Search
Press SKIP SEARCH on the Remote once to 4 times during
playback. Each press initiates a 30-second period of high speed
playback (up to 2 minutes). When the specified portion of the tape
is skipped, normal playback resumes automatically. To return to
normal playback during Skip Search, press PLAY (
) on
INDEX 1
— 9 —
).
4
Advertisement
Table of Contents
