Wordperfect - Advantech PCA-6653 User Manual

WordPerfect

These drivers are designed to work with WordPerfect 5.0 or 5.1. They
support 132-column display in editing mode, and high-resolution
graphics display in PreView mode.
Driver installation
Step 1: Place the Display Driver Diskette into drive A. Make A the
default drive by typing A: <ENTER>. Run the SETUP program by
typing SETUP <ENTER>. Press any key to display a list of supported
applications. Use the arrow keys to select WordPerfect and press
<ENTER>. A list of supported screen resolutions will be displayed.
Use the arrow keys to select the desired screen resolution and press
<ENTER> (make sure your monitor is able to display the resolution
desired). Press <END> to begin the driver installation process. A
default drive and directory path will be displayed. Use the backspace
key to erase this default and type in the WordPerfect directory. At
this point you may be asked to create the target directory if it does not
already exist. After the files have been installed, press any key to
return to the list of supported applications. Press <ESC> followed by
Y to exit to DOS.
Step 2: Start WordPerfect, and press <SHIFT>+<F1> to enter the
setup menu. Select D for Display and G for Graphics Screen Type,
and then choose the desired Chips VGA resolution.
Configuring WordPerfect 5.0 for 132 columns
Follow these instructions to configure WordPerfect 5.0 for 132
column text mode:
Step 1: To use the SETCOL program to set 132 columns and 25 rows,
type the following command:
SETCOL 132, 25 <ENTER>
Step 2: Start WordPerfect. The program will detect the number of
rows and columns automatically. If for some reason WordPerfect is
unable to adapt to 132 columns by 25 rows, start WordPerfect with
the following command:
WP /SS=25,132 <ENTER>
28 PCA-6653 User's Manual