Advantech PCA-5630 Startup Manual

PCA-5630 Industrial VGA Card with XGI Volari™ V3XE
Before you begin installing your card, please make
sure that the following materials have been shipped:
• 1 PCA-5630 Industrial VGA card
• 1 PCA-5630 Startup Manual
• 1 CD with driver utility
• 1 DVI-VGA Adapter
• Warranty certificate
If any of these items are missing or damaged, contact
your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF file.
Acrobat Reader can be downloaded at:
www.adobe.com/products/acrobat/readstep2.html
Software Installation
The CD disc contains a driver installer program that
will lead you through the installation of your VGA card.
Caution
The computer is provided with a battery-powered
Real-time Clock circuit. There is a danger of explo-
sion if battery is incorrectly replaced. The battery
doesn't need to be charged. Replace only with same
or equivalent type recommended by the manufacturer.
Discard used batteries according to manufacturer's
instructions.
FCC
This device complies with the requirements in part 15 of
the FCC rule. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/network
For technical support and service, please visit our
support website at:
http://www.advantech.com.tw/support
This manual is for the PCA-5630 series Rev. A1.
Part No. 2002563010
Printed in Taiwan
All manuals and user guides at all-guides.com
1st Edition
May 2006
Industrial VGA card specifications
• GPU: XGI Volari™ V3XE
• Bus: AGP 3.0, 4X
• Memory: 64bit, 200MHz, 128MB DDRI SDRAM
• CRT1 output: 2048 x 1536, up to 85Hz vertical rate
• CRT2 output: 1600 x 1200, up to 60 Hz vertical rate
• TV-Out output: S-Video/Composite port; HDTV upto
720p & 1080i
• DVI: Single Link TMDS up to UXGA
(1600x1200@60Hz).
• Dual Display Mode: Under Windows XP, all the 4 com-
binations shown below support mirror mode and exten-
sion mode, while under Windows 2000, these
combinations support only mirror mode.
(1) CRT1 (CON3) + CRT2 (DVI1 + DVI-VGA Adapter)
(2) CRT1 + DVI
(3) CRT1 + S-Video
(4) S-Video + DVI
• Under Linux, this product only supports CRT1 + DVI mir-
ror mode.
• Triple-DAC Mode: This product does NOT support tri-
ple-DAC display.
• OS's Supported: Microsoft® windows XP/2K/Linux
1. Jumpers and Connectors
The VGA card has a number of jumpers and connectors
that allow you to configure your system to suit your appli-
cation.
JP6: NTSC/PAL Mode Selector under DOS
Jumper Setting
Connectors
Label
CON2
CON3
DVI1
PCA-5630 Startup Manual
Description Output Mode
Under DOS
Closed Pal
Open NTSC
Function
S-Video/Composite port
Port
DVI port
1