Table of Contents
Advertisement
Word
These drivers are designed to work with Microsoft Word 5.0 and 5.5.
Driver installation
If you have already installed Word on your computer, go to Step 2 to
install the new video driver.
Step 1: Install Word as normal.
Step 2: After you complete the Word installation, place the Display
Driver diskette into drive A. Make A the default drive by typing A:
<ENTER>. Run the SETUP program by typing SETUP <ENTER>.
Press any key to display a list of supported applications. Use the
arrow keys to select Word and press <ENTER>. Use the arrow keys
to select the desired screen resolution and press <ENTER> (make sure
your monitor is able to display the resolution desired). Press <END>
to begin the driver installation process. A default drive and directory
path will be displayed. Use the backspace key to erase this and type in
your Word directory. After the files have been installed, press any key
to return to the list of supported applications. Press <ESC> followed
by Y to exit to DOS.
Step 3: Copy the driver file for the desired resolution that was just
installed to SCREEN.VID. (The driver file names are listed on pages
12-13.)
Chapter 3 Software Drivers and Utilities
27
Advertisement
Table of Contents
