Releasing The Edge - Garmin EDGE 500 Quick Start Manual

2. Place the rubber disk on the back of
the bike mount.
The rubber tabs align with the back
of the bike mount so it stays in
place.
3. Place the bike mount on the bike
stem.
4. Attach the bike mount securely
using the two bands.
Rubber
disk
Edge 500 Owner's Manual
Bike mount
notches
Bands around
the bike stem
5. Align the tabs on the back of the
Edge with the bike mount notches.
6. Press down slightly and turn the
Edge clockwise until it locks into
place.
Edge Mounted on the
Bike Stem

releasing the Edge

1. Turn the Edge clockwise to unlock
the device.
2. Lift the Edge off the mount.
Getting Started