Chevrolet Light Duty Truck 1973 Service Manual page 166

I B - 4 6 BODY
See CAUTION on page 1 of t h i s
CAUTION:
section regarding fasteners used on seats and
seat b e l t s .
DRIVERS SEAT
Seat Adjuster
Removal
1. Remove seat by removing bolts securing seat to seat
riser.
2. Remove seat belt from adjuster.
3. Remove adjuster from seat. See figure 38G.
Installation
1. Install seat adjuster to seat. Torque bolts to
specifications.
2. Install seat belt. Torque retaining nut to
specifications.
Shoulder of b o l t must bottom on
CAUTION:
weld n u t .
3. Install seat onto seat riser, and torque screws to
specifications.
SEAT RISER
Removal
1. Remove seat and adjusters as an assembly by
removing bolts securing seat to riser.
2. Remove bolts securing seat riser to floor.
Fig. 37G—Door Wedge Adjustment
SEATS
Installation
1. Install seat riser to floor. Torque bolts to
specifications.
2. Install seat and torque bolts to specifications.
LIGHT DUTY TRUCK SERVICE MANUAL