Front Display Panel; On-Screen Display; Tape Position Indicator; Timer Warning Display - JVC HR-J588 Instructions Manual

FRONT DISPLAY PANEL

ON-SCREEN DISPLAY

When "O.S.D." is set to "ON" (
operational indicators appear on the TV screen.
A
Operation mode indicators
B
Tape speed SP/LP/EP
* EP is for NTSC playback only.
C
Tape direction
D
Counter display
E
Tape remaining time indicator
F
Audio mode display
pg. 37), various
pg. 22
pg. 22
pg. 19
A
"Timer" Indicator
B
Play Indicator
C
Record Indicator
D
Channel/Clock Display
To switch display, press – –:– –. Channel position is not
displayed during playback.
Mode Display (L-1, L-2 or SAt*)
* When "L-2 SELECT" is set to "SAT" (
instead of "L-2".
E
Instant REVIEW Indicator
F
VCR Indicator pg. 21
G
#
SAT Indicator
G

Tape position indicator

The tape position indicator
appears on the TV screen
3
when you press or
5
from the Stop mode
or perform an Index Search
( pg. 19). The position of
q
" " in relation to "0"
(beginning) or "+" (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape used, the tape position
indicator may not appear correctly.
H
Type of broadcast
I
VPS/PDC Indicator
J
Current day/month/year
K
Clock display
L
Channel position number and station name/
Auxiliary input indicator (L-1, L-2 or SAT*)
* When "L-2 SELECT" is set to "SAT" (
instead of "L-2".
M

Timer warning display

A warning appears on the TV screen to tell you that the
timer-recording is to start in 5 minutes if you're not in the
Timer mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
&
the display, press .
N
Cassette loaded mark
pg. 25, 27
pg. 11
pg. 39
), "SAt" appears
pg. 18
pg. 30
Beginning
pg. 22
pg. 25, 27
pg. 39), "SAT" appears
5
EN
End