Canibeep Radio Pro Beeper Collar; Description Of The Product; First Use From New - Num'axes CANICOM 1500 PRO User Manual

Hide thumbs Also See for CANICOM 1500 PRO:
Table of Contents

Advertisement

Re-initialize the system by removing the battery from its
housing, then with a metallic tool (e.g. screwdriver, scissors)
touch each of the 2 battery contacts for 2 seconds
approximately (Diagram 16).
Insert the battery again: one beep is emitted indicating the
battery is in correct position.
Restart your CANICOM collar using the remote control.
If the problem persists, contact your distributor or check out on www.numaxes.com. You can also contact
NUM'AXES at +33.2.38.63.03.84 or by Email internationalsales@numaxes.com.
Depending on the extent of the malfunction, you may have to return your product for service and repair.
For all repairs please supply the following:
the complete product
the proof or purchase (invoice or sales receipt)
If you omit one of these items, the After Sales Service will have to invoice you for any repair costs incurred.
● CANIBEEP RADIO PRO beeper collar

- DESCRIPTION OF THE PRODUCT

Diagram 17
Magnetic switch position indicator
Allows you to switch On/Off the collar
and to select the operating modes

- FIRST USE FROM NEW

 Fitting the battery in the CANIBEEP RADIO PRO beeper collar
Unscrew the 4 screws of the top of CANIBEEP RADIO PRO collar using a Philips screwdriver.
Insert the battery (3 Volt Lithium CR123 A) paying attention to follow polarity indicated on the battery
housing.
A beep sound (low pitch) is emitted and the red indicator LED flashes, indicating the correct installation of the
battery.
Put the top back in place paying attention to the rubber seal. It must be clean, well positioned in its groove,
and the groove must be clean too in order to avoid any problem with the waterproof function.
Firmly screw up the 4 screws in order to maintain your product's water tightness.
User's guide - CANICOM 1500 PRO
Red indicator LED
Sound diffuser
Reset: connect the 2 supports of the battery
Diagram 19
Diagram 18
Strap
Diagram 16
Polarity "-" of
Polarity "+" of
the battery
the battery
Battery
polarity
indicator
11/24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents