Edit From A Camcorder Or; Another Video Recorder - JVC HR-J457MS Instructions Manual

Edit From A
Camcorder Or
Another Video
Recorder
NUMBER "0"
2
3
Recording deck
VIDEO IN AUDIO IN
AV Cable (not provided)
Source player
VIDEO OUT
Camcorder
AUDIO OUT
or

Another video recorder

Source player
1 2 3
4 5 6
7 8 9
0
4
Your recorder
To the remote PAUSE
connector
Editing Cable
(not provided)
EDIT
You can use a camcorder or another video recorder as the
source player and your video recorder as the recording deck.
MAKE CONNECTIONS
1
Connect the AUDIO/VIDEO OUT connectors on the
camcorder or another video recorder to the front panel
AUDIO/VIDEO input connectors on the recording deck.
When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder's instruction manual
for operating procedure.
SET RECORDER'S INPUT
MODE
2
Press NUMBER key "0" so that "F-1" appears on the
display panel.
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
IMPORTANT
To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
PAL, SECAM and NTSC camcorders can be used as a
player for editing.
For more information on multi-system compatibility,
pg. 24.
23
EN