Table of Contents
Advertisement
4
Tune The TV
To Your Video
Recorder
Back of VCR
VIDEO
TEST
ON
OFF
INSTALLING YOUR NEW RECORDER (cont.)
The video recorder sends picture and sound signals via the RF
connecting cable to your TV on UHF channel 37.
1
2
3
3
2
5/8
6
q
4
NOTES:
If CH37 is occupied by a local station, adjust the RF output
channel adjustment screw to use another channel between
RF
CH33 and CH41 instead.
If some interference noise is continually seen on the screen,
consult your JVC dealer.
TURN ON THE RECORDER
Press OPERATE.
SELECT OUTPUT MODE
Set the TEST switch on the back of the recorder to ON.
SET TV CHANNEL
Set your TV to the video channel (UHF channel 37).
Two white bars appear on screen vertically.
Tune the TV until the bars are as clear as they can be.
Your TV should be set to the channel designated for
use with a video recorder, or to a spare channel if
there is not a specified video channel on your TV.
RESET OUTPUT MODE
Return the TEST switch to OFF.
Advertisement
Table of Contents
