Table of Contents
Advertisement
NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER'S MANUAL Ver. A2
The screen contains the following details:
Fields in DS-Lite Configuration:
Field
General Settings
Enable DS-Lite tunnel
WAN Interface
Configuration Modes
MTU
Static Parameters
DS-Lite Remote IPv6 address
DS-Lite tunnel IP address (IPv4)
Subnet Mask
Lw4o6 Port Range
Click Apply at any time during configuration to save the information that you have entered.
Click Cancel to exit from this page without saving the changes.
Description
To enable/disable DS-Lite functionality in CPE.
Select WAN interface from dropdown on which DS-Lite tunnel has to be
created.
Modes to configure DS-Lite tunnel on a WAN interface. Currently, Static,
Dynamic (DHCPv6 option-64) and Lw4o6 DS-Lite modes are supported.
It is used to specify Maximum Transfer Unit size for DS-Lite tunnel.
IPv6 address of the remote tunnel endpoint. (When you select Dynamic
mode, this field is disabled.)
IPv4 address of the remote tunnel endpoint.
IPv4 Address subnet mask.
This is the port range for Source NAT. Applicable only for Lw4o6 type.
218
Advertisement
Table of Contents
