Table of Contents
Advertisement
TV Receiver
Player
21-pin SCART Cable
(not provided)
VIDEO
CHAN-
NEL or
RF Cable
AV mode
(provided)
Recorder
AV2 SELECT Setting
1
Press MENU to access the Main Menu screen.
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
2
Press %fi to move the highlight bar (pointer) to "AV2 SELECT".
3
#
4
Press OK or
to select "AV2", "DECODER" or "SAT".
a–AV2
: To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector, or to use the satellite tuner connected to the
AV2 IN/DECODER connector.
b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
c–SAT
: To view a satellite programme with the TV set while the recorder is in Timer
mode, in Stop mode, recording or turned off. (
5
Press MENU to return to normal screen.
If you have a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2 SELECT" back to "DECODER" after
editing.
If you're not connecting a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT" set to "AV2".
The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was
removed from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using
a decoder, be sure to set "AV2 SELECT" back to "DECODER".
Your recorder
ENTREE
ANT. IN
ENTREE/DECODEUR
ENTREE/SORTIE
ANTENNE
AV2
AV1
IN/DECODER
IN/OUT
SORTIE
RF OUT
Another recorder
Recorder
Your recorder
ENTREE/DECODEUR
ENTREE/SORTIE
AV2
AV1
IN/DECODER
IN/OUT
21-pin SCART Cable
(not provided)
Another recorder
Player
#
.
pg. 32)
31
EN
TV Receiver
ENTREE
ANT. IN
ANTENNE
SORTIE
RF OUT
RF Cable
VIDEO
(provided)
CHANNEL
or AV
mode
MODE SET
B. E. S. T.
ON
PICTURE CONTROL
AUTO
AUTO TIMER
OFF
O. S. D.
ON
DIRECT REC
ON
POWER SAVE
ON
AV2 SELECT
AV2
NEXT PAGE
[5∞] =
[MENU] : EXIT
Advertisement
Table of Contents
